AFRC EP2409 LCD ESC programmer for AFRC Electronic Speed Controller ESC programming settings DIY Assembly Upgrading

AFRC EP2409 LCD ESC programmer for AFRC Electronic Speed Controller ESC programming settings DIY Assembly Upgrading

=================================

Specification:

Model: AFRC EP2409
Size: 51.5 x 37.3 x 15mm
Weight: 22g

Programmable Items Description

USEAGE OF THE PROGRAMMING CARD

1. As a separate equipment, it can display ESC parameters or set parameters directly with its own LCD programming card.
2. As a USB adapter, it can connect ESC to personal computer. ESC firmware update and
programming setting can be done with application on computers.

BUTTON AND SOCKET FUNCTION DESCRIPTION

MENU: Circularly switch programming projects and modes; Exit the user-defined parameters
setting; Enter the programming project setting.

VALUE: Circularly switch the parameter value of a programming project, and circularly switch the user-defined parameter value of a programming project;

RESET: Enter or return to the mode, select the main menu;

OK: Save and send the parameter values in the current mode to the ESC. Enter the mode of user-defined parameter value setting of a programming project.

ESC: Use the programming line to connect this port with the programming port of ESC (most
airplane models' ESC throttle line is multiplexed with the programming line, in this case, insert the
ESC throttle line into this port)

USB: This port is connected to the USB port of the computer.

SETTING THE ESC PARAMETERS

Judge whether there is a built-in BEC and an independent programming port, and connect the
ESC and setting cards in the correct connection.
A: If there is BEC output in the ESC and the programming line is multiplexed with the throttle
line, pull out the throttle line from the receiver and insert it to the “ESC” socket of the LCD setting card.
B: If there is a built-in BEC output and an independent programming port in the ESC, using
a programming line connect the ESC programming way. Port with the “ESC” port on LCD setting box.
Connect the ESC with battery and turn on the switch of the ESC, the LCD setting card will
display the starting up interface. Press any key on the LCD setting card,
Setting card and ESC start establishing communi-cation and dispay”Connecting ESC”. After a few seconds, will display current Mode 0_car 0, then the first setting parameter is displayed. Use "MENU" and "VALUE" buttons to change the setting parameters, press the "OK" key to save the setting parameters into the ESC.

SWITCH THE PRESET MODE OF THE ESC

Setting card can store three sets of preset modes. According to different car models,motors and different race rules, use different application setting. Users can first set the parameters of each mode, when in different venue or using different motors, just call the corresponding mode.
Call method: when the ESC and LCD setting card is connecting, press the "RESET" key. After the current mode name is displayed on the LCD, press "VALUE" key to switch to the next mode. Press "VALUE" again, continue to switch to the next mode,
and so on.
To modify the parameters of the selected mode, press the “MENU” key to display the current mode and modify the parameters.